-- 2 --

SAFETY RULES
WARNING: Failure to follow all
Safety Rules and Precautions can result in
serious injury.
DANGER: THISPOWER TOOL CAN
BEDANGEROUS! This unitcan causeser ious
injury including amputation or blindness t o the
operator and others. The warnings and safety
instructions in this manual must be followed to
provide reasonable safety and efficiency i n us-
ing this unit. Theop erator is responsible for fol-
lowing the warnings and instructions in this
manual and on the unit. Never allow children to
use this tool.

KNOW YOUR UNIT

SReadyour instruc tion manual carefully until
you completely understand and can follow
allwarnings and safety rulesbefore operat-
ingt he unit.
DRestrict unit to users who understand and
will follow all warnings and safety rules in
this manual and on the unit.

PLAN AHEAD

WARNING: Inspect area before start-
ing unit. Remove all debris and hard objects
such as rocks, glass, wire,etc. that can rico-
chet, be thrown, or otherwise cause injur y or
damage during operation.
DAlways wear eye protection when operating,
servicing, or performing maintenance on unit.
Wearing eye protection will help to prevent
brushor debrisfrom being throw n orr icochet-
ing into eyes and face which can result in
blindness and/or serious injury. Eye protec -
tion should be marked Z87.
DWear hearing protection when using this
unit.
DSecureha ir above shoulder length. Secur e or
remove jewelry, loose clothing, or clothing
withl oosely hanging straps, ties, tassels, etc.
They can be caught in moving parts.
DStay alert. Do not operate unit when you are
tired,ill, upset, or i f you are under the influence
of alcohol, drugs, or medication.
DKeep children, bystanders, and animals
away from work area a minimum of 30 feet
(10meters) whenstarting or operating unit .

HANDLE FUEL WITH CAUTION

DEliminateall sour ces of sparks or flame(in-
cludingsmok ing, open flames, or work that
cancause spark s) in the areas where fuel is
mixed, poured, or stored.
DMix and pour fuel in an outdoor area; store
fuelin a cool, dry, well ventilat ed place; use
an approved, marked container for all fuel
purposes.
DDo not smoke while handling fuel or while
operating the unit.
DDonot fill fuel tank whileengine isrunning.
DMake sure the unit is properly assembled
andin good operating condition.
DAvoidspilling fuel or oil. Wipe up fuel spills
before starting the engine.
DMoveat leas t 10 feet (3 meters) away from
fuel and fueling site before starting engine.
DAlways store gasoline in a container ap-
proved for flammable liquids.

OPERATEYOUR UNIT SAFELY

DANGER: RISK OF CUT; KEEP
HANDS AWAY FROM BLADE--Blade
moves momentarily after the trigger is re-
leased. Do not attempt to clear away cut ma-
terialw hent he blade is in motion. Make sure
the switch is in the OFF position, the spark
plug wire is disconnected, and the blade has
stopped moving before removing jammed
materialfrom the cutting blade. D o not grab or
hold the unit by the cutting blade.
DInspect unit before each use for worn,
loose, missing, or damaged parts. Do not
use until unit is in proper working order.
DKeep outside surfaces free from oil and fuel.
DNever start or run engine inside a closed
roomor building.Breathing exhaust fumes
can kill.
DAvoiddangerous env ironments. Do not use
in unventilated areas or where explosive
vapors or carbon monoxide build up could
bepr esent.
DDonot overr each or use from unstable sur-
facess uch as ladders, trees, steep slopes ,
rooftops,etc. Keep firmfootingand balanc e
at all times.
DDonot raise unit abov e your shoulders; the
cutting blade can come dangerously close
to your body.
DAlwaysk eep unit in front of your body.Keep
allparts of y our body away from the cutting
blade.
DKeep the cutting blade and air vents free
from debris.
DUse only for jobs explained in this manual.

MAINTAINYOUR UNIT PROPERLY

DHave all maintenance other than the rec-
ommendedprocedures describedin the in-
struction manual performed by an autho-
rized service dealer.
DDisconnect spark plug before performing
maintenance except for carburetor adjust-
ments.
DDo not use a cutting blade that is bent,
warped, cracked, broken, or damaged in
any other way. Have worn or damaged
parts replaced by an authorized service
dealer.
DUse only recommended Poulan PRO cut-
ting blades and replacement parts; use of
anyother parts may void your warranty and
cause damage to your unit.
DEmpty fuel tank before storing the unit. Use
upfuel left in carburet or by starting engine and
letting it run until it stops.
DHandcarry t he unit with the engine stopped
andthe muffler and cutting blade away from
your body, preferably with the blade cover
installed.