Table of Contents |
|
Warranty and Service | 2 |
Table of Contents | 3 |
Warning | 5 |
Introduction | 7 |
Description | 7 |
Specifications | 7 |
Unpacking | 8 |
Contents of the Shipping Container | 8 |
Installation and Assembly | 9 |
Installing Switch Arm | 10 |
Installing Cutterhead Guard | 10 |
Dust Collection | 11 |
Grounding Instructions | 11 |
Extension cords | 12 |
230 Volt, Single Phase Operation | 12 |
Three Phase Operation | 12 |
Adjustments | 13 |
Drive Belt Tension | 13 |
Drive Belt Replacement | 14 |
Fence Movement | 14 |
Fence Stops | 15 |
Fence Removal | 16 |
Locking Handles | 16 |
Table and Knife Adjustments | 16 |
Setting Tables Parallel | 17 |
Setting Knives at Correct Height and Parallel To Outfeed Table | 18 |
Outfeed Table Stop Screws | 22 |
Setting Infeed Table (Depth of Cut) | 22 |
Infeed Table Depth Stop | 22 |
Infeed Table Stop Screws | 23 |
Replacing Knives in the Cutterhead | 23 |
Eliminating “Play” in Tables | 24 |
Operating Controls | 24 |
Operation | 24 |
Hand Placement | 25 |
Surfacing | 25 |
Edge Jointing | 25 |
Rabbeting | 26 |
Jointing Short or Thin Work | 26 |
Jointing Warped Surfaces | 26 |
Beveling | 26 |
Direction of Grain | 27 |
Skewing (Shear Cutting) | 27 |
Maintenance | 28 |
Sharpening Knives | 28 |
Cutterhead Repairs | 29 |
Optional Accessories | 32 |
Replacement Parts | 32 |
Parts List: Cutterhead Assembly | 33 |
Parts List: Fence Assembly | 34 |
Fence Assembly | 35 |
Parts List: Outfeed Table and Base Assembly | 36 |
Outfeed Table and Base Assembly | 37 |
Parts List: Infeed Table Assembly | 38 |
Infeed Table Assembly | 40 |
Parts List: Stand Assembly | 41 |
Stand Assembly | 43 |
3
