Powermatic PJ882 operating instructions Introduction Description, Specifications

Introduction

This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures for a Model PJ-882 Jointer. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance with instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site: www.wmhtoolgroup.com.

Description

The Model PJ-882 Jointer is built upon a parallelogram design. This design allows independent adjustment of sections of the infeed and outfeed tables to ensure the tables remain parallel with the cutterhead and with each other. The fence has a tilting capacity of 45 degrees forward and backward, with positive stops.

Specifications

	(1 Phase Model)	(3 Phase Model)
Model Number	PJ-882	...................................................PJ-882
Stock Number	1610079	................................................ 1610080
Maximum Cutting Width (in.)	8	............................................................8
Maximum Cutting Depth (in.)	1/2	......................................................... 1/2
Rabbeting Capacity (in.)	1/2	......................................................... 1/2
Cutterhead Speed (RPM)	7,000	..................................................... 7,000
Motor	TEFC, 2HP, 1Ph, 230V	................... TEFC, 3HP, 3Ph, 230/460V
		(prewired 230V)
Starter	magnetic	................................................magnetic
Number of Knives	3	............................................................3
Cuts Per Minute	21,000	................................................... 21,000
Cutterhead Diameter (in.)	3-1/16	.................................................... 3-1/16
Table Surface (L x W)(in.)	83 x 8	.................................................... 83 x 8
Fence Size (L x H)(in.)	38 x 4-3/4	.............................................. 38 x 4-3/4
Fence Tilt (deg.)	45 forward, 45 backward	........................45 forward, 45 backward
Positive Stops (deg.)	-45, 90, +45	........................................... -45, 90, +45
Dust Chute Diameter (in.)	4	............................................................4
Overall Dimensions (L x W x H)(in.)	84 x 28 x 44	...........................................84 x 28 x 44
Net Weight – approx. (lbs.)	610	........................................................ 610
Shipping Weight – approx. (lbs.)	744	........................................................ 744

The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, WMH Tool Group reserves the right to change specifications at any time and without prior notice, without incurring obligations.

7