6. Set Software Limit (Hi/Lo End)

There are High and Low software limits. If these are exceeded, the display will give an error message.

To set the Lo_End press (Default setting is 7mm)

To set the Hi_End press (Default setting is 230mm)

7. Set Tolerances

The tolerance defines the accuracy of the positioning.

Step 1: Press

Display

.........................[default]

Step 2: Enter the value for tolerance.

Step 3: Press

to confirm or press

to clear.

27

Page 27
Image 27
Powermatic WP2510 operating instructions Set Software Limit Hi/Lo End, Set Tolerances