Installation

5.Start the UPS by pressing the button as shown in Figure 2. The Power On indicator illuminates indicating that power is available from the rear receptacles.

On/Off Button

Power On Indicator

Test/Alarm Reset Button

Figure 2. Powerware 3115 Front Panel

The UPS conducts a self-test and enters Normal mode. If the alarm beeps, consult “Troubleshooting” on page 23.

NOTE The UPS charges to 90% in approximately 12 hours. However, it is recommended that the UPS charge for 24 hours after installation or long storage.

Powerware® 3115 User’s Guide S www.powerware.com

5