UPS Maintenance

Testing New Batteries

NOTE It is recommended that the UPS charge for 24 hours before testing the new batteries.

Press and hold the button for three seconds to initiate the battery test. The UPS automatically distributes some of the load to the batteries for 15 seconds and tests the battery’s performance. If there is a problem with the battery, the UPS returns to Normal mode and the alarm beeps. For more information, see “Troubleshooting” on page 23.

Recycling the Used Battery

Contact your local recycling or hazardous waste center for information on proper disposal of the used battery.

W A R N I N G

SDo not dispose of battery or batteries in a fire. Batteries may explode. Proper disposal of batteries is required. Refer to your local codes for disposal requirements.

SDo not open or mutilate the battery or batteries. Released electrolyte is harmful to the skin and eyes. It may be toxic.

C A U T I O N

Do not discard the UPS or the UPS batteries in the trash. This product contains sealed, lead-acid batteries and must be disposed of properly. For more information, contact your local recycling or hazardous waste center.

Powerware® 3115 User’s Guide S www.powerware.com

17