Setting Up the Console | 25 |
Set Resistance Range (Bike only)
Value Range: High, Medium, or Low
(Default: High)
You can set a low, medium, or high base resistance on the recumbent or upright bikes. There are 25 levels of resistance within each base setting, but the base setting affects the overall resistance range. The following ranges are available:
High: Provides full resistance range.
Medium: Provides approximately two thirds of the resistance that is available within the high group setting.
Low: Provides approximately one third of the resistance that is available within the high group setting.
Set Crossramp Auto Level (EFX Dual only)
Value Range: 0 to 20
(Default: 10)
Use this setting to choose a specific ramp incline so that the EFX automatically returns to that incline at the end of a workout session.
Viewing the Informational Displays
Information Display settings are values that provide you with information about the equipment. Types of information contained in this setting group include, an event log, software and equipment serial numbers, and usage information.
To view the System settings:
1.At the Welcome banner, press Pause.
2.Press the following number keys in sequence to enter the password:
6 5
3.Press Enter.
Use the following table to set up customized Informational Display values.
