Pride Mobility 1420 Actuator Lighting Module Not Shown, Sleep Mode, Trouble Codes, Diagnosis

V I I . O P E R A T I O N

Actuator Lighting Module (Not Shown)

Theactuatorlightingmoduleisalsolocatedonthepowerbase.Theactuatorlightingmoduleprovidesacontrolandpowerinterface betweenthepowermodule,thelights,and/orthepowerseatactuator.

Sleep Mode

Your Remote Plus controller has a sleep mode feature. Sleep mode is a built-in circuit that automatically shuts off the main power if the joystick is not moved in any direction for a period of time. The battery condition meter lights on the keypad indicate sleep mode by blinking once every 25 seconds. To restore power and continue, push the on/off key twice.

Trouble Codes

In addition to indicating the current state of battery charge, the battery condition meter can also indicate possible problems with your power chair. The battery condition meter has ten lights. The lights provide information by the number of lights that are flashing. If any of the meter lights are flashing rapidly, the controller may be indicating a fault. For instance, if the first light is flashing rapidly, the battery voltage is nearly depleted. The following is a list of the possible errors signified by the rapidly flashing meter. When you get a trouble code, contact your authorized Pride provider.

FLASHING LIGHTS	DIAGNOSIS	SOLUTION
10	High Battery Voltage	Check batteries.
9	Solenoid Brake Fault	Check motor/brake wiring.
8	Possible Controller Fault	See authorized Pride provider.
7	Possible Joystick Fault	See authorized Pride provider.
6	Inhibit Active	Unplug charger. Check connections.
5	Right Motor Wiring Fault	Check right motor wiring.
4	Right Motor Disconnected	Check right motor wiring.
3	Left Motor Wiring Fault	Check left motor wiring.
2	Left Motor Disconnected	Check left motor wiring.
1	Low Battery Voltage	Check batteries/battery wiring.

34 www.pridemobility.com Quantum Jazzy 1400 Series Rev D May 04