Pride Mobility INFMAN63121 manual To charge the batteries using the off-board charger

Models: INFMAN63121

1 40
Download 40 pages 3.29 Kb
Page 26
Image 26
To charge the batteries using the off-board charger:

V I . B A T T E R I E S A N D C H A R G I N G

To charge the batteries using the off-board charger:

 

1. Position the front of your travel chair next to a standard electrical

 

outlet. See figure 21.

 

2. Be certain the controller power is turned off.

 

3. Plug the off-board charger into the battery box charger port.

 

NOTE: The off-board charger connector can be inserted

 

through a slot found on the back of the basket and located di-

 

rectly in front of the battery box.

 

4. Plug the off-board charger into the electrical outlet.

 

NOTE: If it is a Pride off-board charger, then there are two LEDs

 

in it. Refer to the supplied charger manual for information on

 

LED indications. If it is not a Pride off-board charger, then follow

 

the instructions supplied by the manufacturer.

Figure 21. Battery Charging

5.When the batteries are fully charged, disconnect the off-board charger from the electrical outlet and then from the battery box.

NOTE: The Z-Chair batteries can be charged when the battery box is removed from the power base.

To charge the batteries with the battery box removed from the power base:

1.Remove the battery box from the power base. See IV. “Assem- bly/Disassembly.”.

2.Position the battery box next to a standard electrical outlet. See figure 22.

3.Plug the off-board charger into the battery box charger port.

4.Plug the off-board charger into the electrical outlet.

5.When the batteries are fully charged, unplug the off-board charger from the electrical outlet and then from the battery box.

6.Reinstall the battery box to the power base.

To charge the batteries using the off-board charger /program- ming socket found on the controller:

1.Position the front of your travel chair next to a standard electrical outlet.

2.Be certain the controller power is turned off and the freewheel levers are in the engaged position. See III. “Your Z-Chair.”

3.Plug the off-board charger into the off-board charger/program- ming socket located on the controller. See figure 23.

4.Plug the off-board charger into the electrical outlet.

5.When the batteries are fully charged, unplug the off-board charger from the electrical outlet and then from the controller.

Figure 22. Battery Charging (Battery Box Removed)

Figure 23. Battery Charging through the Controller

26

www.pridemobility.com

Z-Chair

Page 26
Image 26
Pride Mobility INFMAN63121 manual To charge the batteries using the off-board charger, outlet. See figure