V I . C O M F O R T A D J U S T M E N T S
After you have become familiar with your Jazzy’s operation, you may find the need to make adjustments to the Jazzy’s seat. There are some adjustments you can make to increase your comfort such as seat height and angle, armrest height and angle, the footrest height and angles, and the joystick position.
CAUTION! If your Jazzy 1113 was configured at your local Pride provider or service center, please consult your health care professional before changing seat position or making any other adjustment. Some of these adjustments may degrade your Jazzy’s performance and safety by changing its center of gravity.
SEAT HEIGHT AND ANGLE
You can change the seat height by either raising or lowering the four seat towers.
To change the seat height:
1.Remove the seat. See V. “Disassembly.”
2.Removethe balldetent pinfromeach seat tower. See figure 11.
Note: Before you can remove the ball detent pin from each front seat tower, you must first remove the front battery box. See V. “Disassembly.”
3.Raise or lower each seat tower to the desired position.
4.Install the ball detent pin into each seat tower.
5.Reinstall the seat.
BALL DETENT PIN
Figure 11. Seat Height Adjustment
ADJUSTMENT KNOB
To change the seat height:
You can change the seat angle by either raising or lowering only one set of seat towers (front or rear).
ARMREST WIDTH
To change the armrest width:
1.Locate the two knobs on the armrest receiver bracket. See figure 12.
2.Loosen the knobs and slide the armrests in or out to the desired width.
3. Tighten the knobs. | Figure 12. Armrest Width Adjustment |
24 | www.pridemobility.com | US Jazzy 1113/Rev I/Feb03 |
