Pride Mobility Jazzy 1113 Armrest Angle, Armrest Height Optional, Controller Extension

V I . C O M F O R T A D J U S T M E N T S

ARMREST ANGLE

You can increase or decrease the armrest angle to fit your specific needs. See figure 13.

To change the armrest angle:

1.Lift the armrest straight up so that it is perpendicular to the floor.

2.Use a 7/16-in. wrench to loosen the jam nut. See figure 13.

3.Use a 5/32-in. hex key to loosen the adjustment screw.

4.Turn the screw clockwise to lower the front of the armrest and counterclockwise to raise the front of the armrest.

5.Lock the adjustment screw into place by tightening the jam nut.

TURN THIS SCREW	LOOSEN
	THIS
TO CHANGE
	SETSCREW
ARMRESTANGLE
	TO ADJUST
	JOYSTICK
JAM NUT
LOCKS
ADJUSTMENT
SCREW
IN PLACE

Figure 13. Armrest Angle Adjustment Figure 14. Underside of Armrest

ARMREST HEIGHT (OPTIONAL)

Your Jazzy may be equipped with height-adjustable armrests.

To change the armrest height:

1.Remove the ball detent pin from the armrest.

2.Move the armrest up or down to the desired height.

3.Align the holes and reinsert the ball detent pin.

CONTROLLER EXTENSION

The controller can easily slide out away from the armrest, or in toward the armrest.

To extend the controller:

1.Use a 3/16-in. hex wrench to loosen the setscrew. See figure 14.

2.Slide the controller mounting bracket into or out of the armrest to the desired position.

US Jazzy 1113/Rev I/Feb03 www.pridemobility.com 25