Pride Mobility Jazzy 1113 To calibrate the joystick Remote Plus only, Monthly Checks, Storage

X . C A R E A N D M A I N T E N A N C E

To calibrate the joystick (Remote Plus only):

1.Positionthejoystickinthefullreversepositionandholditthere.Turnonthecontroller.

2.Thebatteryconditionmeterlightsupfromonelighttotenlights,andthenbacktoonelight.Itdoesthistwice,thenblinks rapidly.

3.Turnoffthecontroller.

4.Positionthejoystickinthefullforwardpositionandholditthere;thenturnthecontrolleron.

5.Thebatteryconditionmeterlightsupfromonelighttotenlights,andthenbacktoonelight.Itdoesthistwice,thenblinks once,andthenitblinkscontinuously.

6.Turnoffthecontroller.Nowthejoystickandcontrolleraresetuptofunctionproperlytogether.

MONTHLY CHECKS

νCheck that the anti-tip wheels do not rub the ground when you are operating the Jazzy; adjust them as necessary. See VI. “ComfortAdjustments” in this manual.

νCheck for extreme wear on the anti-tip wheels. Replace them as necessary.

νCheck for drive tire wear. See an authorized Pride Mobility Products Corporation provider for repair.

νCheck the rear casters for wear. Replace as necessary.

νCheck the rear forks for damage or fluttering which indicates that they may need to be adjusted or the bearings may need to be replaced. See an authorized Pride Mobility Products Corporation provider for repair.

νKeep your Jazzy clean and free of foreign material such as hair, food, drink, etc.

YEARLY CHECKS

Take your Jazzy to an authorized Pride Mobility Products Corporation provider for yearly maintenance. This helps to ensure that your Jazzy is functioning properly and helps prevent future complications.

Storage

Your power chair should be stored in a dry place, free from temperature extremes. When storing, disconnect the batteries from the power chair. See IX. “Batteries and Charging.”

WARNING! If you fail to store the unit properly, the frame can rust and the electronics can be damaged.

Cleaning Precautions

CAUTION! Never hose off your power chair or place it in direct contact with water. Your power chair has a painted, ABS plastic body shroud that allows it to be easily wiped clean with a damp cloth.

CAUTION! Never use any chemicals to clean a vinyl seat, as they may cause the seat to become slippery or dry out and crack. Use soapy water and dry the seat thoroughly.

US Jazzy 1113/Rev I/Feb03 www.pridemobility.com 49