C O M F O R T | Pride Mobility Jet10Ultra guide

V I . C O M F O R T

To change the armrest width:

1.Locate the two armrest knobs on each side of the armrest receiver bracket. See figure 14.

2.Loosen the knobs.

3.Slide the armrests in or out to the desired width.

4.Tighten the knobs.

Armrest Height

To change the armrest height:

1.Loosen the setscrew on the armrest. See figure 14.

2.Raise or lower the armrest to the desired height.

3.Tighten the setscrew to secure the armrest.

Armrest Angle Adjustment

To change the armrest angle:

1.Lift the armrest straight up so that it is perpendicular to the floor. See figure 15.

2.Loosen the jam nut.

3.Turn the adjusting screw clockwise to lower the front of the armrest, or turn the adjusting screw counterclock- wise to raise the front of the armrest.

4.Tightenthejamnuttolocktheadjustingscrewinto place.

Foot Platform Height

Thefootplatformheightiseasilyadjustedtodifferentheights in 1/2-in. increments.

To raise or lower the foot platform:

1.Remove the fasteners from the foot platform bracket. See figure 16.

2.Raise or lower the foot platform to the desired height.

3.Reinstall the fasteners into the foot platform bracket and tighten.

Foot Platform Depth

To adjust the foot platform depth:

1.Remove the fasteners from the foot platform bracket. See figure 16.

2.Move the foot platform in or out to the desired depth.

3.Reinstall the fasteners into the foot platform bracket and tighten.

Foot Platform Angle

You can adjust the angle of the foot platform with a hex key. See figure 17.

To adjust the foot platform angle:

1.Flip up the foot platform and locate the setscrew.

2.Turn the setscrew counterclockwise to raise the front of the foot platform.

A D J U S T M E N T S

SETSCREW

SEATBACK

RELEASE LEVER

ARMREST KNOB

Figure 14. Seatback Angle Adjustment

ARMRESTANGLE

ADJUSTING

SCREW

JAM NUT

Figure 15. Armrest Angle Adjustment

FOOT

PLATFORM

RETAINING PIN