I X . C A R E A N D M A I N T E N A N C E
νThe body shroud has been sprayed with a clear sealant coating. You can apply a light coat of car wax to help it retain its
νCheck all electrical connections. Make sure they are tight and are not corroded. Batteries must sit flat within the battery tray, withthebatteryterminalsfacinginward,towardeachother.Refertothebatterywiringlabelforthecorrectwiringlayout.
νAll wheel bearings are prelubricated and sealed. They require no subsequent lubrication.
Daily Checks
νWith the controller turned off, check the joystick. Make sure it is not bent or damaged and that it returns to the neutral position when you release it. Check the rubber boot around the base of the joystick for damage. Visually inspect the boot. Do not handle or try to repair it. See your authorized Pride Provider if there is a problem.
νVisually inspect the controller cable. Make sure that it is not frayed, cut, or has any wires exposed. See your authorized Pride Provider if there is a problem.
νCheck for flat spots on solid tires. Flat spots could adversely affect stability.
Weekly Checks
νDisconnect and inspect the controller battery door. Look for corrosion. Contact your authorized Pride Provider if necessary.
νEnsure that all parts of the controller system are securely fastened to your power chair. Do not overtighten any screws.
νCheck for proper tire inflation. There should be 35 psi in each tire (if equipped with pneumatic tires). If a tire does not hold air, see your authorized Pride Provider for replacement of the tube.
νCheck the brakes. This test should be carried out on a level surface with at least three feet of clearance around your power chair.
To check the brakes:
1.Turn on the controller and turn down the speed level of your power chair.
2.After one second, check the battery condition meter. Make sure that it remains on.
3.Slowly push the joystick forward until you hear the electromagnetic brakes click. Immediately release the joystick.You must be able to hear each electromagnetic brake operating within a few seconds of joystick movement. Repeat this test three times, pushing the joystick backwards, then left, and then right.
Monthly Checks
νCheck that the
νCheck for extreme wear on the
νCheck for drive tire wear. See your authorized Pride Provider for repair.
νCheck the caster wheels for wear. Replace them as necessary.
νCheck the caster forks for damage or fluttering which indicates that they may need to be adjusted or have the bearings replaced. See your authorized Pride Provider for repair.
νKeep your power chair clean and free of foreign material, such as mud, dirt, hair, food, drink, etc.
Yearly Checks
Take your power chair to your authorized Pride Provider for yearly maintenance. This helps ensure that your power chair is functioning properly and helps prevent future complications.
36 | www.pridemobility.com | Jet 10 Ultra/RevA/Apr04 |
