V I . B A T T E R I E S A N D C H A R G I N G

PROHIBITED! Do not allow unsupervised children to play near the scooter while the batteries are charging. Pride recommends that you do not charge the batteries while the scooter is occupied.

WARNING! If your battery charger has not been tested and approved for outdoor use, then do not expose it to adverse or extreme weather conditions. If the battery charger is exposed to adverse or extreme weather conditions, then it must be allowed to adjust to the difference in environmental conditions before use indoors. Refer to the manual supplied with the battery charger for more information.

Follow these easy steps to charge your batteries safely:

1.Position your scooter close to a standard electrical outlet.

2.Remove the key from the key switch.

3.Make certain that the manual freewheel lever is in the drive (down) position.

4.Plug the charger power cord into the charger power cord receptacle.

5.Extend the charger power cord and plug it into the electrical outlet. It is recommended that you charge your batteries for 8 to 14 hours.

6.When the batteries are fully charged, unplug the charger power cord from the electrical outlet and then from the charger power cord receptacle.

NOTE: There is a charger inhibit function on your scooter. The scooter will not run and the battery condition meter will not operate while the batteries are charging.

FREQUENTLY ASKED QUESTIONS

How does the charger work?

When your scooter’s battery voltage is low, the charger works harder, sending more electrical current to the batteries to bring up their charge. As the batteries approach a full charge, the charger sends less and less electrical current. When the batteries are fully charged, the current sent from the charger is at nearly zero amperage. There- fore, when the charger is plugged in, it maintains the charge on your scooter’s batteries, but does not overcharge them. We do not recommend that you charge your scooter’s batteries for more than 24 consecutive hours.

What if my scooter’s batteries won’t charge?

!Ensure the red (+) and black (-) battery cables are connected properly to the battery terminals.

!Ensure both battery harnesses, extending from the batteries, are plugged into their mating harness leading to the charger.

!Ensure both ends of the charger power cord are inserted fully.

Can I use a different charger?

Chargers are selected precisely for particular applications and are especially matched to the type, size, and chemi- cal formulation of specific batteries. For the safest and most efficient charging of your scooter’s batteries, we recommend use of the charger supplied as original equipment with your Pride product only.Any charging method resulting in batteries being charged individually is especially prohibited.

V I . B A T T E R I E S A N D C H A R G I N G

How often must I charge the batteries?

Two major factors must be considered when deciding how often to charge your scooter’s batteries:

!All day scooter use on a daily basis.

!Infrequent or sporadic scooter use.

With these considerations in mind, you can determine how often and for how long you should charge your scooter’s batteries. We designed the onboard charger so that it will not overcharge your scooter’s batteries. However, you may encounter some problems if you do not charge your batteries often enough and if you do not charge them on a regular basis. Following the guidelines below will provide safe and reliable battery operation and charging.

!If you use your scooter daily, charge its batteries as soon as you finish using it for the day. Your scooter will be ready each morning . We recommend that you charge your scooter’s batteries for 8 to 14 hours after daily use.

!If you use your scooter once a week or less, charge its batteries at least once a week for 12 to 14 hours at a time.

!Keep your scooter’s batteries fully charged.

!Avoid deeply discharging your scooter’s batteries.

How can I ensure maximum battery life?

Fully charged deep-cycle batteries provide reliable performance and extended battery life. Keep your scooter’s batteries fully charged whenever possible. Protect your scooter and batteries from extreme heat or cold. Batteries that are regularly and deeply discharged, infrequently charged, stored in extreme temperatures, or stored without a full charge may be permanently damaged, causing unreliable performance and limited service life.

How can I get maximum range or distance per charge?

Rarely will you have ideal driving conditions—smooth, flat, hard driving surfaces with no wind or curves. Often, you will face hills, pavement cracks, uneven and loosely packed surfaces, curves, and wind, all of which affect the distance or running time per battery charge. Below are a few suggestions for obtaining the maximum range per battery charge.

!Always fully charge your scooter’s batteries prior to daily use.

!Maintain 30-35 psi in each tire.

!Plan your route ahead to avoid as many hills, cracked, broken, or soft surfaces as possible.

!Limit your baggage weight to essential items.

!Try to maintain an even speed while your scooter is in motion.

!Avoid stop-and-go driving.

What type and size of battery should I use?

We recommend deep-cycle batteries that are sealed and maintenance free. Both AGM and Gel-Cell are deep- cycle batteries that are similar in performance. Do not use wet-cell batteries, which have removable caps.

WARNING! Corrosive chemicals are contained in batteries. Use only AGM or Gel-Cell batteries to reduce the risk of leakage or explosive conditions.

NOTE: Sealed batteries are not serviceable. Do not remove the caps.

26

www.pridemobility.com

Legend

Legend

www.pridemobility.com

27

Page 15
Image 15
Pride Mobility Legend 4, Legend 3 manual Frequently Asked Questions, How does the charger work?