9.Have a second person hold the console assem- bly near the Right Upright (80) and the Left Upright (not shown). Connect the Upright Wire (79) to the console wire. See the inset draw- ing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNEC-
TORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON. Then, remove the wire tie from the Upright Wire.
Set the console assembly on the Right Upright (80) and the Left Upright (not shown). Be care- ful not to pinch the wires.
10. Attach the console assembly with six 5/16" x 1" Bolts (6) and four 5/16" Star Washers (13) (only one side is shown).
See steps 4 and 6. Tighten the 3/8" x 4" Bolts
(9).
9 | Console |
|
|
|
Assembly |
|
|
| |
| Console |
|
|
|
| Wire | 79 |
| Console |
| 80 | Wire | ||
|
| |||
|
| Tie | Wire | |
|
|
|
| 79 |
10 |
| Console |
|
|
|
|
|
| |
| Assembly |
| 6 | |
|
|
|
| |
|
|
| 13 | 13 |
|
|
| 6 | |
|
|
|
|
11