9. | Have a second person hold the console assem- | 9 |
|
|
| bly near the Right Upright (76). | Console |
| |
|
|
| ||
| Connect the Upright Wire (63) to the console |
| Assembly |
|
|
|
|
| |
| wire. See the inset drawing. The connectors |
|
|
|
| should slide together easily and snap into |
|
|
|
| place. If they do not, turn one connector and |
|
|
|
| try again. IF THE CONNECTORS ARE NOT |
|
|
|
| CONNECTED PROPERLY, THE CONSOLE |
|
|
|
| MAY BE DAMAGED WHEN THE POWER IS |
|
|
|
| TURNED ON. Remove the long tie from the |
|
|
|
| Upright Wire and the tie from the console wire. |
|
|
|
| Then, insert the connectors into the Right Upright |
|
|
|
| (76). |
|
|
|
| Set the console assembly on the Right Upright |
|
| Console |
| (76) and the Left Upright (not shown). Make sure |
| Console Wire | |
| 63 | Wire | ||
| that no wires are pinched. |
| ||
|
|
| Long |
|
|
| 76 | Tie | 63 |
|
|
| ||
|
|
|
| |
10. | Start an M8 x 25mm Screw (5) and two 5/16" | 10 |
|
|
| x 5/8" Screws (79) with two M8 Star Washers |
|
| |
|
|
|
| |
| (6) into the Right Upright (76) and the Right |
|
|
|
| Handrail (64) as shown. Do not tighten the |
|
|
|
| Screws yet. |
|
|
|
| Attach the Left Handrail (not shown) as de- |
|
|
|
| scribed above. Then, firmly tighten all six |
|
|
|
| Screws. |
|
|
|
|
|
| 64 |
|
|
|
| 5 | 79 |
|
|
|
| |
|
|
|
| 6 |
|
|
| 76 |
|
|
| 11 |
|
|
