11.Slide the Right Upright Cover (89) up against the Right Handrail (64). Attach the Right Upright Cover with two M4.2 x 16mm Screws (56). Be careful not to overtighten the Screws.
Attach the Left Upright Cover (not shown) as de- scribed above.
See steps 4 and 5. Tighten the six 3/8" x 3 1/4" Screws (2).
11 |
|
64 |
|
89 | 56 |
|
12.Attach the Latch Housing (67) to the Left Upright (66) with two #10 x 1/2" Screws (86); make sure that the knob is on the indicated side. Start both Screws, and then tighten them. Be careful not to overtighten the Screws.
12 |
|
Knob | 67 |
| |
86 | 66 |
|
13.Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plas- tic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 23 and 24).
12
