Chapter 2
Setting Up Your Printer
2-27
Setting Up Your Printer
2-26
If you do not have a CD-ROM drive, you can copy the Setup files from
the Setup CD-ROM onto floppy diskettes at another computer, and then
use them instead of the CD-ROM to install the software.
1
Insert the Setup CD-ROM into the CD-ROM drive.
2
Select the printer model which is connected to your computer.
3
Select the language you want to use.
4
Click the Make icon.
5
The Copy to Floppy dialog box appears.
Select the floppy disk drive that you will insert the diskette in.
7
When prompted, insert a blank and formatted diskette into the
floppy drive, and click Yes to start copying.
8
If you need more than one disk, insert the next disk and click Yes.
9
When completed copying, click Close in the Copy to Floppy dialog
box.
6
Click Copy all disk images.
6
Select the floppy
drive you will use.
Select the language
you want to use.
Shows the number of
disks required to copy
Making Installation Diskettes
Chapter 2
03-M30UK(2-22 to 3-3) 5/22/00 3:39 PM Page 26