Samsung SCX-1000 Series To change Copy Contrast, To change Copy Resolution, To change Copy Size

06-M30UK(5-10 to 6-9) 5/22/00 3:24 PM Page 4

Chapter 6	Changing Copy Setup
	Before making copies, you can change the contrast, resolution and
	scale. Any change will take effective to every copy you will make.

To change Copy Contrast

1)Press the Contrast button.

2)Press ˆ or ¤ until the desired setting appears in the display. You may choose NORMAL, LIGHTEN or DARKEN.

3)Press Enter/Select.

To change Copy Resolution

1)Press the Resolution button.

2)Press ˆ or ¤ until the desired setting appears in the display.

● You may choose NORMAL, BEST or DRAFT.

3)Press Enter/Select.

To change Copy Size

1)Press the Zoom Rate button repeatedly until the desired setting appears in the display.

Or press Zoom Rate, ˆ or ¤ to increase/decrease the scale value.

[ZOOM RATE]

¤ NORMAL 100%

Whenever you press Zoom Rate, following options display in order.

NORMAL 100% makes a copy that is the same size as your original.

ENTIRE	91%(ˆ	¤)	reduces your copy slightly to ensure
			that the whole image, out to all the
			edges, is copied.
			pre-scans the original to determine where
AUTOFIT
			its edges are, and then reduces or
			enlarges the original to fit on the paper
			you are using.
TWICE	200%(ˆ	¤)	enlarges the original to 200%.
MAX	400%(ˆ	¤)	enlarges the original to the highest
			enlargement percentage.
			reduces the original to 50%.
HALF	50% (ˆ	¤)
			reduces the original to the lowest
MIN	25% (ˆ	¤)
			reduction percentage.

CUSTO M 100%(ˆ ¤) lets you specify an exact reduction or enlargement percentage between 25% and 400%.

3)Press Enter/Select.

Chapter 6

6-4Making a Copy Making a Copy 6-5