Samsung SCX-1000 Series manual Hardware Requirements, Software Requirements

02-M30UK(2-12 to 2-21) 5/22/00 3:41 PM Page 18

Continued

Installing the Printer Software

Hardware Requirements

To install and run the Printer Software you must have the following hardware configuration:

●120MB of available Hard disk space

●Pentium 133 or better

●32MB of RAM or more

Software Requirements

To install and run the Printer Software you must have the following software configuration.

●Windows 95 OSR2

●Windows 98 or Windows 98 SE

●If you are installing the software onto a Windows NT 4 Workstation, you must have installed Service Pack 3 or higher

●Internet Explorer 4.01 or later

1 Installing the printer software

1 Make sure the printer is plugged in and connected to your computer.

2 Start Windows.

3 When the New Hardware Found message appears, click the Cancel button.

4 Insert the Setup CD-ROM into the CD-ROM drive. The Model Selection window should appear automatically.

If the installation does not start automatically, do the following:

a)Click Start ➝ Run from the Windows task bar.

b)Type e:\Setup.exe (substitute your CD-ROM drive letter for the ‘e’) on the command line, then click the OK button.

5 Select the printer model which is connected to your computer.

6 Select the language you want to use .

If you do not have a CD-ROM drive, you can copy the Setup program onto floppy diskettes.

For more information see ‘Making Installation Diskettes’ page 2-26.

Chapter 2

2-18Setting up Your Printer Setting up Your Printer 2-19