11.Have a second person hold the console assem- bly near the Right Upright (89).

Connect the Upright Wire (88) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CON-

NECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Remove the wire tie from the Upright Wire. Then, insert the connectors into the Right Upright (89).

Set the console assembly on the Right Upright

(89)and the Left Upright (not shown). Make sure that no wires are pinched.

12.Start an M8 x 25mm Bolt (5) with an M8 Star Washer (10) and two 5/16" x 5/8" Screws (113) with two M8 Star Washers (10) into the Right Upright (89) and Right Handrail (101) as shown.

Do not tighten the Bolt and Screws yet. Attach the Left Handrail (not shown) as de- scribed above. Then, tighten both Bolts and all four Screws.

11

Console

 

 

Assembly

 

88

Console Wire

Console

Wire

 

Wire

 

89

Tie

88

 

12

 

 

 

 

101

 

 

 

 

5

10

 

10

113

 

 

89

 

 

 

 

 

12

Page 12
Image 12
ProForm PATL59910.0 user manual Console Assembly Console Wire Tie 101 113