17.IMPORTANT: Before you begin this step, make sure that you have read and followed all instructions in step 16.
Raise the Frame (56) to the position shown.
Have a second person hold the Frame until this step is completed.
Orient the Storage Latch (53) so that the large barrel and the latch knob are oriented as shown.
Attach the lower end of the Storage Latch (53) to the Base (94) with a 3/8" x 2" Bolt (3) and a 3/8" Nut (12).
Attach the upper end of the Storage Latch (53) to the bracket on the Frame (56) with a 3/8" x 1 3/4" Bolt (6) and a 3/8" Nut (12).
18.Attach the Rear Feet (57) to the Frame (56) as shown with four #8 x 3/4" Screws (2).
Lower the Frame (56) (see HOW TO LOWER THE TREADMILL FOR USE on page 25).
17 |
|
|
56 |
|
|
12 | 6 |
|
| 53 |
|
Latch |
|
|
Knob |
|
|
Large |
|
|
Barrel |
|
|
94 | 12 | 3 |
|
| |
18 |
|
|
57 | 57 |
|
|
| |
2 | 2 |
|
|
| |
56 |
|
|
19.Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 27 and 28).
14
