8.With the help of another person, carefully tip the exercise cycle onto its left side so it is resting on the Left Inner Handlebar (not shown).
Identify the Left Rear Stabiliser (16), which is marked with an “L” sticker. Attach the Left Rear Stabiliser and the Stabiliser Plate (87) to the Frame (1) with two M8 x 25mm Button Screws (40) as shown; do not tighten the Button Screws yet.
Insert the Right Rear Stabiliser (98) between the Stabiliser Plate (87) and the Frame (1). Attach the Right Rear Stabiliser with two M8 x 25mm Button Screws (40). Tighten all four Button Screws.
9.See step 10. Remove the three indicated M4 x 12mm Screws (41) and the Left and Right Handlebar Covers (6, 5) from the Console (4).
With the help of another person, carefully raise the exercise cycle so it is resting on the Front and Rear Stabilisers (not shown).
Whilst another person holds the Console (4) in the position shown, connect the wire harnesses on the Console to the Upper Wire Harness (42) and the Pulse Wire Harness (106). Insert the excess wire har- ness down into the Upright (2).
Attach the Console (4) to the Upright (2) with four M4 x 12mm Screws (41). Be careful to avoid pinching the wire harnesses.
10.Attach the CD Holder (104) to the Console (4) with two M4 x 12mm Screws (41) as shown.
Attach the Left Handlebar Cover (6) to the Console (4) with three M4 x 16mm Screws (57).
Attach the Right Handlebar Cover (5) to the Console (4) in the same way.
8 |
|
|
| 98 |
|
40 |
|
|
40 | 87 |
|
|
| |
| 16 | 1 |
9 |
|
|
41 |
| 4 |
|
| |
2 | 42 |
|
|
| |
| 106 |
|
| Wire |
|
| Harnesses | |
10 |
|
|
| 104 |
|
41 |
|
|
|
| 4 |
|
| 5 |
57 |
|
|
6 |
|
|
8
