ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed.

Assembly requires the following tools: The included allen wrench

, two adjustable wrenches (not

included)

, and a phillips screwdriver (not included)

.

1.Firmly hold one of the Uprights (15 or 46) with both hands. Raise the Uprights about halfway.

Place one foot against the base, as shown in drawing 1b. Carefully raise the Uprights (15, 46) until the base is rest- ing on the floor.

2.Pivot the Console (17) upward until it stops. Using the in- cluded allen wrench, tighten a 3/8” x 1 1/4” Bolt (45) into each Upright (15, 46).

6

1a

46

15

1b

46

15

Base

2

17

46

45

15

45

Page 6
Image 6
ProForm PFTL05051 user manual Assembly