Beginning Assembly
This section will cover the basic assembly and adjustment instructions needed to begin opera- tion. Complete the assembly in the order provid- ed in this manual and then read the remaining portion of the manual before attempting any type of operation.
Your safety is important! Please follow the warnings below during this entire section:
Loose hair and clothing could get caught in machinery and cause serious personal injury. Keep loose clothing rolled up and long hair tied up and away from machinery.
Serious personal injury could occur if you con- nect your machine to the power source before you have completed the assembly process. DO
NOT connect the machine to the power source until instructed to do so.
Sharp edges on metal parts may cause person- al injury. Examine the edges of all metal parts before handling.
Fence
The fence assembly is a heavy part. Seek assis- tance when lifting it onto the fence base support.
NOTICE
The fence can easily scratch the table sur- face of the jointer. Use extreme care when making adjustments to the fence assembly
To install the fence assembly:
1.Carefully lift the fence assembly onto the fence base support.
2.Attach the fence assembly to the jointer assembly with (6)
Fence Assembly
Cap Screws and Lock Washers
(Also 3 On The Opposite Side)
Fence Base
Support
Figure 12. Fence assembly installed.
Ultimate Series Jointers |
