Grizzly G9953ZXF, G4815 instruction manual Start Up, Main Stop lever

Start Up

Serious personal injury could result if the machine is connected to the power source during assembly or adjustment. Wait until the machine is turned off, unplugged and all working parts have come to a complete stop before attempting to assemble or adjust the machine!

Loose hair and clothing could get caught in machinery and cause serious personal injury. Keep loose clothing rolled up and long hair tied up and away from machinery.

Projectiles from the machine could cause serious eye injury. Wear safety glasses at all times.

Before starting the machine:

1.Read this manual and make sure you follow all safety precautions before operating this machine.

2.Make sure the cutterhead guard is installed.

3.Make sure all tools and foreign objects have been removed from the machine.

4.Review and understand Section 3: Circuit Requirements beginning on page 6.

Starting the machine:

1.Wear safety glasses at all times while the jointer is running!

2.Plug the jointer into the power source.

-22-

3.Push the ON button shown in Figure 25. Note—Make sure the cutterhead moves in a clockwise direction as viewed with the infeed table to the left. If the cutterhead moves in a counter-clockwise direction, then the power needs to be disconnected and any two power wires need to be switched at the cir- cuit breaker in the electrical box.

Power Indicator	EMERGENCY STOP
	Button
Light
	ON Button

Figure 25. Pedestal switch.

Main STOP lever

Routine stops on the jointer should be performed using the STOP lever shown in Figure 26. Power is disconnected when the lever is activated, and with continued activation, the lever triggers a brake that slows the cutterhead to a stop.

STOP Lever

Figure 26. STOP lever.

Ultimate Series Jointers