10.Attach the console assembly with six 5/16” x 1 1/2” Bolts (7) and six 5/16" Star Washers (10) (only three are shown).
See steps 4 and 6. Tighten the 3/8" x 4 1/2" Bolts (6).
11.Raise the Frame (56) to the position shown.
Have a second person hold the Frame until this step is completed.
Orient the Storage Latch (53) so that the large barrel and the Latch Knob (54) are in the posi- tions shown.
Attach the Latch Bracket (14) and the Storage Latch (53) to the Base (83) with two 3/8" x 2" Bolts (4) and two 3/8" Nuts (8).
Attach the upper end of the Storage Latch (53) to the bracket on the Frame (56) with a 3/8" x 2" Bolt (4) and a 3/8" Nut (8). Note: It may be nec- essary to move the Frame back and forth to align the Storage Latch with the bracket.
Lower the Frame (56) (see HOW TO LOWER THE TREADMILL FOR USE on page 25).
10 |
|
|
|
Console |
|
| |
Assembly |
| 10 | |
|
|
| |
|
|
| 7 |
| 10 |
| 10 |
7 |
|
| |
|
|
| |
11 | 56 |
|
|
|
|
| |
8 |
| 4 |
|
54 |
| 53 |
|
| Large | ||
|
| Barrel | |
|
| 14 | 83 |
| 8 |
| 4 |
|
|
| |
10
