8
6. Set the Left Upright Spacer (76) on the Base
(83). With the help of a second person, hold a
Bolt Spacer (77) inside the lower end of the Left
Upright (74). Next, insert a 3/8" x 4 1/2" Bolt (6)
with a 3/8" Star Washer (9) into the Left Upright
and the Bolt Spacer. Repeat this step with a
second Bolt Spacer (77), 3/8" x 4 1/2" Bolt
(6), and 3/8" Star Washer (9). Then, set the
Left Upright in the Left Upright Spacer.
Tighten the 3/8" x 4 1/2" Bolts (6) with your fin-
gers; do not fully tighten the Bolts yet.
With the help of a second person, tip the tread-
mill so that the Base (83) is flat on the floor.
76
74
6
83
77
6
5. With the help of a second person, carefully tip
the treadmill onto its right side. Partially fold the
Frame (56) so the treadmill is more stable; do
not fully fold the Frame yet.
Attacha Base Foot (81) to the Base (83) in the
locationshown with a #8 x 1" Tek Screw (2) and
a BaseFoot Spacer (13). Then, attach another
BaseFoot (81) with only a #8 x 1" Tek Screw (2).
Attach a Wheel (84) to the Base (83) with a 3/8"
x 2" Bolt (4) and a 3/8" Nut (8). Do not over-
tighten the Nut; the Wheel must turn freely.
5
83
84
56
4
8
81
2
81
13
2
4. With the help of a second person, hold a Bolt
Spacer (77) inside the lower end of the Right
Upright (78). Next, insert a 3/8" x 4 1/2" Bolt (6)
with a 3/8" Star Washer (9) into the Right
Upright and the Bolt Spacer. Repeat this step
with a second Bolt Spacer (77), 3/8" x 4 1/2"
Bolt (6), and 3/8" Star Washer (9). Then, set
the Right Upright in the Right Upright Spacer
(79). Be careful not to pinch the Upright Wire
(38).
Tighten the 3/8" x 4 1/2" Bolts (6) with your fin-
gers; do not fully tighten the Bolts yet.
79
78
77
6
4
83
38
9
9