28
PROBLEM: The walking belt is off-center or slips when walked on
SOLUTION: a. If the walking belt is off-center, first remove the
key and UNPLUG THE POWER CORD.If the
walking belt has shifted to the left, use the hex
keyto turn the left rear roller bolt clockwise 1/2 ofa
turn; if the walking belt has shifted to the right,
turn the bolt counterclockwise1/2 of a turn. Be
careful not to overtighten the walking belt. Then,
plugin the power cord, insert the key, and run the
treadmillfor a few minutes. Repeat until the walk-
ing belt is centered.
b. If the walkingbelt slips when walked on, first re-
move the key andUNPLUG THE POWER CORD.
Using the hexkey, turn both rear roller bolts clock-
wise, 1/4 of a turn.When the walking belt is cor-
rectly tightened,you should be able to lift each
edge of the walkingbelt 2 to 3 in. (5 to 7 cm) off
the walkingplatform. Be careful to keep the walk-
ing belt centered.Then, plug in the power cord, in-
sert the key,and carefully walk on the treadmill for
a few minutes.Repeat until the walking belt is
properly tightened.
a
b