Proxima ASA DP6850 Avoid excessively hot locations, Sound volume, Lens care, Cabinet care

Caution

■When the projector is not to be used for an extended period.

■ Moving the projector.

• When moving the projector, be sure

For safety purposes when the projector is not to be used for an extended period because of travel, etc., always disconnect the power plug from the power outlet. Also close the lens cover to prevent the lens surface being scratched.

Disconnect the plug from the power outlet.

to replace lens cap, disconnect the
power plug from the power outlet
and disconnect all external	Disconnect the
connections. Failure to do this	plug from the
	power outlet.

could damage the power cord and cause fire or electrical shock.

Avoid any impact or shock to the projector

because this could result in malfunction.

•When moving this projector outdoors, protect it from wetting due to rain, etc. If the

projector should become wet, dry it thoroughly before further use. Continued use while wet could result in fire or electrical shock.

[General Cautions]

■Avoid excessively hot locations.

Do not place this projector in direct sunlight or near a hot object such as a stove, etc., because the heat could have adverse influence on the cabinet and other parts.

■Sound volume.

Set the volume at a suitable level to avoid bothering other people. It is also better to keep the volume level low and close the windows at night to protect the neighborhood environment.

■Lens care

Use commercially available lens tissue to clean the lens (used to clean cameras, eyeglasses, etc.). Be careful not to scratch the lens with hard objects.

■Cabinet care.

•The cabinet is made of plastic and discoloration or paint peeling can occur if wiped with a solvent

such as benzine, thinner, etc.

•Before using chemical wipes, be sure to read and observe the instructions.

•Do not spray volatile substances such as insect repellent on the cabinet. Also, do not

allow long-term close contact with rubber or vinyl products because this could result in discoloration, peeling paint, etc.

•Use a soft cloth to clean the cabinet and operation panel. When excessively soiled,

dilute a neutral detergent in water, wet and wring out the cloth and afterward wipe with a dry cloth. Do not apply undiluted detergent directly to the projector.

■Extended usage.

When using this projector for an extended period, stop periodically to rest the eyes to prevent eye fatigue.