Pioneer PDP-LX608G, PDP-LX508G Watching TV, Changing channels, Changing the volume and sound

Watching TV 06

Note

•You can select “Auto”, “High”, “Mid” or “Low” for the brightness of the POWER ON indicator. When “Auto” is selected, the brightness of the indicator changes to “High”, “Mid” or “Low” to match the brightness level of the viewing area. For details, see Blue LED Dimmer on page 40.

Changing channels

Use the remote control or the control panel on the right-hand side of the plasma television to change channels.

•Before operating with the remote control unit, make sure to select the TV mode using its SELECT button. See Controlling other equipment using the supplied remote control unit on page 51.

Channel display

8

AAA

STEREO

STANDARD

FULL

Using P+ / P– on the remote control unit

•Press P+ to increase the channel number.

•Press P– to decrease the channel number.

Note

•CHANNEL +/– on the plasma television operates the same as P+/P–.

•Press CH RETURN to switch back to the previous channel. Press again to return to the current channel.

•P+/P– cannot pick up channels that are set to skip. For Channel Skip, see steps 13 and 14 under Setting up TV channels manually on page 26.

Using 0 to 9 on the remote control unit

• Select channels directly by pressing buttons 0 to 9.

For example:

Press 2 to select channel 2 (one-digit channel).

Press 1 then 2 to select channel 12 (two-digit channel). Press 1, 2 then 3 to select channel 123 (three-digit channel).

When viewing Teletext information:

•View a page directly which is three-digit page number from 100 to 899 by pressing buttons 0 to 9. See also Operating the Teletext basics on page 61.

Note

•Press CH RETURN to switch back to the previous channel. Press again to return to the current channel.

•After entering a channel number you can press CH ENTER to tune in the channel more quickly.

•In standby, when you press 0, the power turns on and images come from the “INPUT 1” source. Or, when you press any button from 1 to 9, TV images display.

Changing the volume and sound

Use the remote control or the control panel on the right-hand side of the plasma television to adjust the volume.

Using i+ /i– on the remote control unit

•Press i+ to increase the volume.

•Press i– to decrease the volume.

Volume adjustment

•VOLUME +/– on the plasma television operates the same as i+ /i–.

Using eon the remote control unit

•Press eto mute the sound. eappears on the screen.

Muting

•Press eagain or i+ to restore the sound.

English

21

En