![](/images/new-backgrounds/1224339/224339111x1.webp)
11Using the HDMI Control
Chapter 11
Using the HDMI Control
Using the HDMI Control functions
You can operate such Pioneer devices as a recorder, player or AV system that support the HDMI Control functions using the remote control of the plasma television.
The HDMI Control functions include playback of content using on- screen control panel on the plasma television, recording of a TV program while watching, timer recording using a program list on the connected recorder, and confirmation of timer recording registered in the recorder. For details, see the table below.
Note
•Maximum number of devices that can be connected and controlled using the remote control unit of the plasma television is as follows: recorder x 2, player x 2, AV system x 1.
•Not all device operations may be available for HDMI Control functions.
• Press i+/– or eto adjust volume for the AV system.
• Press , , , , ENTER, RETURN ( ) or color (BLUE, RED, YELLOW, GREEN) buttons to use functions such as the disc navigator on the connected recorder or player.
Note
•When using the HDMI Control functions, operate the remote control unit while pointing it toward the remote control sensor (t) located at the bottom right of the front panel of the plasma television.
•You cannot use two or more HDMI terminals at the rear of the plasma television at the same time except “Power Off” and “Display Language Setup” functions.
HDMI Control functions
Function | Description | Usable | |
devices | |||
|
| ||
|
|
| |
Playback of | The proper input source is automatically | Recorder/ | |
content | selected and the content is played back on the | player | |
| plasma television as you press PLAY on the |
| |
| connected device |
| |
|
|
| |
Recorder/player operation can be controlled | Recorder/ | ||
control | player | ||
| the plasma television (play, stop, fast forward/ |
| |
| reverse, etc.) |
| |
|
|
| |
Recording of TV | The program now watching can be recorded | Recorder | |
program | using the remote control unit of the plasma |
| |
| television |
| |
|
|
| |
Timer recording | Timer recording using a program list on the | Recorder | |
| recorder connected |
| |
|
|
| |
Confirmation of | Recording schedule registered in the | Recorder | |
recording | recorder can be displayed and confirmed on |
| |
schedule | the screen using the remote control unit of |
| |
| the plasma television |
| |
|
|
| |
Display | Information on the display menu language is | Recorder/ | |
Language | transferred to the recorder or player | player | |
Setup | connected to the plasma television. For |
| |
| details, see the operation manual that came |
| |
| with the recorder or player. |
| |
|
|
| |
AV system | Receiver/amplifier operation can also be | AV system | |
control | controlled with the remote control unit of the |
| |
| plasma television (volume, surround mode |
| |
| and input selection of the HDMI terminal) |
| |
|
|
| |
Power On | The connected recorder can be turned On | Recorder | |
| when the plasma television is turned On. |
| |
| The plasma television can be turned On when | Recorder/ | |
| the connected recorder(s) or player(s) is | player | |
| turned On and images are input to the plasma |
| |
| television. |
| |
|
|
| |
Power Off | The connected device(s) can be turned Off | Recorder/ | |
| when the plasma television is turned Off | player/AV | |
|
| system | |
|
|
|
56
En