06Watching TV
Chapter 6
Watching TV
Important
•Before watching broadcast channels, the
PDP-LX508G
Turning the power on
•Turn on on the plasma television when the POWER ON and STANDBY indicators are off (see Part names on pages 12 and 13).
•The system is on.
•The POWER ON indicator lights up blue.
•Press or 0 to 9 on the remote control unit or STANDBY/
ON on the plasma television if the STANDBY indicator lights red.
•The POWER ON indicator lights up blue.
•If you press 0 on the remote control unit, images from “INPUT 1” will be displayed.
•If you press 1 to 9, TV images will be displayed.
POWER ON indicator
STANDBY indicator
ON STANDBY SLEEP
button
(located at the bottom on the rear panel. See page 13.)
Placing the system into standby
Press on the remote control unit or STANDBY/ON on the plasma television.
•The STANDBY indicator lights up red.
•The system enters the standby mode and the image on the screen disappears.
Note
•When on the plasma television is off, you cannot turn the power on by pressing or 0 to 9 on the remote control unit or STANDBY/ON on the plasma television.
•If you are not going to use the plasma television for a long period of time, be sure to remove the power cord from the power outlet.
PDP-LX608G
POWER ON indicator
STANDBY indicator
ON STANDBY
button (located on the bottom of the side panel. See page 12.)
20
Plasma television status indicators
The table below shows the operational status of the plasma television. You can check the current status of the system with the indicators on the plasma television.
Indicator status | System status | |
POWER ON | STANDBY |
|
|
|
|
|
| The power cord of the plasma television has been |
|
| disconnected. Or, the power cord of the plasma |
|
| television has been connected but the button |
|
| of the plasma television is off. |
|
|
|
|
| Power to the system is on |
|
|
|
|
| The system is in the standby mode |
|
|
|
For other than the above, see Troubleshooting on page 63.
En
