Volume Control Knob | Classe Audio SSP-800/CT-SSP instruction

16

6Volume Control Knob

The large rotary knob on the right side of the front panel controls the system volume level.

The volume knob increases and decreases volume in precise 0.5dB increments throughout most of the volume range. At extremely low volume, the step size is increased somewhat to facilitate moving between extremely low and normal listening levels. The volume range is from –99.0dB to +14.0dB.

You can also change the volume control display to suit your preferences. For more information, refer to the Volume description in the Display Setup section found later in this manual.

Image 16

Classe Audio SSP-800/CT-SSP owner manual Volume Control Knob

Contents

SSP-800/CT-SSP Surround Sound Processor Class Important Safety Instructions Contents Name PlayLink Introduction Welcome to the Classé family Exceptional Design Features Page Unpacking and Placement Unpacking your SSP NON-RACK-MOUNT Installation for SSP Tighten to In-lbs 0.96 N-m Warm-up/break-in period Operating voltage Voltage protection Standby/On Button and Status Indicator Front Panels Menu On/Off Button TouchscreenAudio Mute Control IR window Volume Control Knob Serial number Rear PanelComposite Video Inputs Component Video Inputs Hdmi Inputs Hdmi Outputs Component Video OutputDigital Audio Inputs Coaxial Digital Audio Inputs Optical Digital Audio Output Coaxial Digital Audio Output Optical10 7.1-Channel Analog Audio Inputs 11 2-Channel Balanced Analog Audio Inputs IR Input IR OutputTrigger Outputs USB Port 17 RS-232 Port CAN-Bus Input and Output 19 10-Channel Analog Outputs Main Power On/Off Switch AC Power Cord Input Remote Control Basic FunctionsAudio Processing Functions Input Sel Selection Button Preset Config Configuration Button Volume Control & Mute ButtonsNavigation & Menu Buttons Function Keys F1 to F4 Step Initial SetupChoose the appropriate cables Connect all source components to the SSP rear panel Terminals to black terminals Power up the system Understanding Surround Sound Name Post-processing Dolby TrueHD Using the SSP-800/CT-SSP Source selection Mode selection Name Description DTS Neo6 Cinema Controls System trims Configuration select Menu System System setup Volume setup Max volume Startup volume IR setup Automation Mute setup Input setup Name Audio Configuration Use Video Next input Triggers Profiles Room EQ Configuration Name Distances Levels Use Speakers Speakers available Auxiliary channels Teach IR Display setup Black level Brightness Timeout Language OSD on screen display Colors Volume Dolby/DTS Dolby Pro Logic DTS Neo6 Dolby Volume Remote Fkeys Important note on Fkey use Features Version info Sensors Hardware setup Classé Delta Series ProductsCategory 5 Network Cables CAN-Bus Terminator Using CAN-Bus CAN-Bus shared features Configuration Operate AC status Status PlayLink Amp info Event log Everything appears to be powered on, but there is no sound TroubleshootingThere is no sound and the Standby LED is not lit IR remote control does not seem to function Only one speaker seems to be playingThere is a hum coming out of the speakers There is a hum coming from the SSP Voltage Protection Circuit Care & Maintenance Input factory defaults Specifications Overall dimensionsNet weight Shipping weight SSP-800 Dimensions CT-SSP Dimensions Installation Worksheet Lachine, Quebec Canada H8T 1B3