max volume
startup volume
IR setup
40
The Max Volume page allows you to establish a maximum volume setting for your system. This scale runs from 0 to 100, with 100 indicating that you do not want any artificial limit placed on the maximum gain your Surround Sound Processor can provide. This setting is interactive. You can set the value to something less than 100, and then adjust the volume to see whether it is appropriate.
NOTE: The volume knob itself does not set the maximum volume; you must set the maximum volume level in this Max Volume setup menu.
Touching the Startup Volume option allows you to set up a preferred volume level for when the SSP wakes out of standby. This starting volume level can be configured in two ways:
•the Last Volume option sets the starting volume to the last level selected
before the unit was powered down. The mute setting is also remembered.
•the Specific option allows you to set a specific volume level with the mute control on or off.
Touching the IR option displays the IR volume speed setup page, shown below. Similar to the rotary knob setup, the IR volume speed controls the degree at which the volume is stepped through when the remote control volume button is pressed. Three settings are available
