remote Fkeys
important note on Fkey use
The remote control supplied with the
For example, if you use the balance control frequently, you may want to consider programming one of the Fkeys to directly access the balance control. By saving the balance control as an Fkey function, you do not need to access the controls page and then choose system trims, level trims, L/R balance to change the parameter.
The remote control F1 to F4 buttons correspond to the Function Keys displayed on the touchscreen. Select the Function Key that you would like to program, Then to select the one you want simply scroll through the list (by touching either the up or down arrows on the right), and then touch the specific function you want that Fkey to perform.
All Classé remote controls provide these same four Fkeys, so that you need not worry about which remote you happen to pick up. Thus F1 on the Surround Sound Processor’s remote control sends the same infrared signal as F1 on the DVD player’s remote control and so on.
While this is intended to minimize confusion amongst different remotes (since this aspect of them will all perform identically), you should take care when assigning different functions on different components to the sameFkey. Doing so can result in two components doing two different things at once, in response to a single press of a button on the remote control. This can sometimes be useful. As an example, F1 could set the Surround Sound Processor to the DVD input, and also set the DVD player to Play, both from the press of a single Fkey.
55
