Front Panels | Classe Audio SSP-800/CT-SSP guide

		MENU	MUTE
		SSP-800
1	2	3	4	5	6
		MENU		MUTE

Front Panels

The front panels of the SSP-800 and CT-SSP are shown above. The numbers in

the drawing refer to the descriptions that follow.

1Standby/On Button and Status Indicator

Pressing the Standby button puts the SSP into standby mode – a low- power state which leaves the Surround Sound Processor and outputs inactive but still allows the processor to respond to system commands via any of the supported control protocols (IR input, CAN-Bus,RS-232, or triggers).

If the processor is already in Standby mode, pressing the Standby button fully powers up the SSP.

•LED On – the SSP is in Standby mode, or the display has timed out due to a display setting.

14

Image 14

Classe Audio SSP-800/CT-SSP owner manual Front Panels, Standby/On Button and Status Indicator

Contents

SSP-800/CT-SSP Surround Sound Processor Class Important Safety Instructions Contents Name PlayLink Introduction Welcome to the Classé family Exceptional Design Features Page Unpacking and Placement Unpacking your SSP NON-RACK-MOUNT Installation for SSP Tighten to In-lbs 0.96 N-m Warm-up/break-in period Operating voltage Voltage protection Standby/On Button and Status Indicator Front Panels Audio Mute Control Menu On/Off ButtonTouchscreen IR window Volume Control Knob Composite Video Inputs Rear PanelSerial number Component Video Inputs Hdmi Inputs Digital Audio Inputs Coaxial Hdmi OutputsComponent Video Output Digital Audio Inputs Optical 10 7.1-Channel Analog Audio Inputs Digital Audio Output CoaxialDigital Audio Output Optical 11 2-Channel Balanced Analog Audio Inputs Trigger Outputs IR InputIR Output USB Port 17 RS-232 Port CAN-Bus Input and Output 19 10-Channel Analog Outputs Main Power On/Off Switch AC Power Cord Input Audio Processing Functions Remote ControlBasic Functions Input Sel Selection Button Navigation & Menu Buttons Preset Config Configuration ButtonVolume Control & Mute Buttons Function Keys F1 to F4 Choose the appropriate cables Initial SetupStep Connect all source components to the SSP rear panel Terminals to black terminals Power up the system Understanding Surround Sound Name Post-processing Dolby TrueHD Using the SSP-800/CT-SSP Source selection Mode selection Name Description DTS Neo6 Cinema Controls System trims Configuration select Menu System System setup Volume setup Max volume Startup volume IR setup Automation Mute setup Input setup Name Audio Configuration Use Video Next input Triggers Profiles Room EQ Configuration Name Distances Levels Use Speakers Speakers available Auxiliary channels Teach IR Display setup Black level Brightness Timeout Language OSD on screen display Colors Volume Dolby/DTS Dolby Pro Logic DTS Neo6 Dolby Volume Remote Fkeys Important note on Fkey use Features Version info Sensors Category 5 Network Cables Hardware setupClassé Delta Series Products CAN-Bus Terminator Using CAN-Bus CAN-Bus shared features Configuration Operate AC status Status PlayLink Amp info Event log There is no sound and the Standby LED is not lit TroubleshootingEverything appears to be powered on, but there is no sound There is a hum coming out of the speakers IR remote control does not seem to functionOnly one speaker seems to be playing There is a hum coming from the SSP Voltage Protection Circuit Care & Maintenance Input factory defaults Net weight SpecificationsOverall dimensions Shipping weight SSP-800 Dimensions CT-SSP Dimensions Installation Worksheet Lachine, Quebec Canada H8T 1B3