hardware setup

1Classé Delta Series Products

Two or more Classé Delta and/or CT series products are required, at least one of which must have a touchscreen display.

2Category 5 Network Cables

These are ordinary network cables, commonly used for broadband Internet connections. They should be typical “straight through” cables not the “crossed over” type, and the total required will be one less than the total number of

Delta and/or CT series components in your system.

3CAN-Bus Terminator

A CAN-Bus Terminator will be required. It is inserted into the CAN-Bus OUT connector of the last component in the CAN-Bus daisy chain. One is included in the box with your SSP. They are also available free of charge from your nearest Classé Customer Support Center http://www.Classeaudio.com/support/service.htm

The diagram below illustrates how to connect the CAN-Bus hardware.

Any combination of models in any order.

CAN-BUS

IN OUT

CAN-BUS

IN OUT

CAN-BUS

IN OUT

CAN-BUS

IN OUT

NOTE: Daisy chain must be terminated with CAN-Bus Terminator.

57

Page 57
Image 57
Classe Audio SSP-800/CT-SSP Hardware setup, Classé Delta Series Products, Category 5 Network Cables, CAN-Bus Terminator