Main Power On/Off Switch | Classe Audio SSP-800/CT-SSP specs

Danger!

20Main Power On/Off Switch

This switch connects and disconnects the SSP from AC.

NOTE: Changes to settings are stored whenever the SSP is put into Standby. Turning off power to the unit before first entering Standby mode erases any setting changes that have been made since the unit was last placed in Standby mode.

21AC Power Cord Input

The detachable three-conductor AC power cord and the socket into which it connects conform to rigorous standards developed by the IEC (International Electrotechnical Commission).

Your SSP contains potentially dangerous voltages and current capabilities. Do not attempt to open it! There are no user- serviceable parts inside. All service must be referred to a qualified authorized Classé dealer or distributor.

23

Image 23

Classe Audio SSP-800/CT-SSP owner manual Main Power On/Off Switch, AC Power Cord Input

Contents

Surround Sound Processor SSP-800/CT-SSP Class Important Safety Instructions Contents PlayLink Name Welcome to the Classé family Introduction Exceptional Design Features Page Unpacking your SSP Unpacking and Placement NON-RACK-MOUNT Installation for SSP Tighten to In-lbs 0.96 N-m Warm-up/break-in period Operating voltage Voltage protection Front Panels Standby/On Button and Status Indicator IR window Menu On/Off ButtonTouchscreen Audio Mute Control Volume Control Knob Composite Video Inputs Rear PanelSerial number Hdmi Inputs Component Video Inputs Digital Audio Inputs Optical Hdmi OutputsComponent Video Output Digital Audio Inputs Coaxial 11 2-Channel Balanced Analog Audio Inputs Digital Audio Output CoaxialDigital Audio Output Optical 10 7.1-Channel Analog Audio Inputs USB Port 17 RS-232 Port IR InputIR Output Trigger Outputs 19 10-Channel Analog Outputs CAN-Bus Input and Output AC Power Cord Input Main Power On/Off Switch Input Sel Selection Button Remote ControlBasic Functions Audio Processing Functions Function Keys F1 to F4 Preset Config Configuration ButtonVolume Control & Mute Buttons Navigation & Menu Buttons Choose the appropriate cables Initial SetupStep Connect all source components to the SSP rear panel Terminals to black terminals Power up the system Understanding Surround Sound Name Dolby TrueHD Post-processing Source selection Using the SSP-800/CT-SSP Name Description Mode selection DTS Neo6 Cinema System trims Controls Configuration select Menu System Volume setup System setup Max volume Startup volume IR setup Automation Mute setup Name Input setup Audio Configuration Triggers Use Video Next input Profiles Room EQ Configuration Name Distances Use Speakers Levels Speakers available Auxiliary channels Black level Teach IR Display setup Brightness Timeout Language OSD on screen display Dolby/DTS Colors Volume Dolby Pro Logic DTS Neo6 Dolby Volume Important note on Fkey use Remote Fkeys Version info Sensors Features CAN-Bus Terminator Hardware setupClassé Delta Series Products Category 5 Network Cables Using CAN-Bus CAN-Bus shared features Configuration Operate AC status Status PlayLink Amp info Event log There is no sound and the Standby LED is not lit TroubleshootingEverything appears to be powered on, but there is no sound There is a hum coming from the SSP IR remote control does not seem to functionOnly one speaker seems to be playing There is a hum coming out of the speakers Voltage Protection Circuit Input factory defaults Care & Maintenance Shipping weight SpecificationsOverall dimensions Net weight SSP-800 Dimensions CT-SSP Dimensions Installation Worksheet Lachine, Quebec Canada H8T 1B3