®
Installation and Operating Instructions
Owner’s Reference PowerPlay 8500
Control Panel – Network
The Network page allows you to modify the network settings of your PowerPlay unit. Please exercise extreme caution when modifying any settings as the incorrect settings will result in loss of network connectivity.
Host Name – The Host Name can be used to access your PowerPlay by typing a name into your browser rather than the local IP address. To alter the Host Name type the new name in the text field.
Enable DHCP – PowerPlay is setup to rely on a DHCP enabled router or switch. If you do not have DHCP enabled on your network
or wish to set up your PowerPlay as a static address on the local network you may choose to disable DHCP by removing the checkbox. In order to maintain network connectivity you must know and complete the network settings.
4826 Sterling Drive, Boulder, CO 80301 | Getting Started 23 |
PH: 720.406.8946 service@psaudio.com www.psaudio.com |
©2012 PS Audio International Inc. All rights reserved.
