3URGXFW5HIHUHQFH*XLGH 6-3

If you experience difficulties, have questions or require additional infor-
mation, contact your loc al distributor, or call your dealer or sales represen-
tative.
3URJUDPPLQJ2YHUYLHZ
The scanner’s programmable feature settings can be modified to accom-
modate your system’s unique requirements. These settings can be commu-
nicated to the scanner in one of two ways:
1. Commands can be sent directly from the host. A limi ted set of
host commands are available. Refer to Appendix D for more
details or contact Tech Support.
2. The easiest, most comprehensive way to program the scanner is to
use the Configurator Express™ On-Screen Programmining Kit. Ask
your dealer for more information about this product.
3. Programming bar code labels can also be used to modify the scan-
ner’s programmable settings. This manual provides the bar code
labels and instructions necessary to configure the scanner’s fea-
tures and options.

3URJUDPPLQJYLD+DQGKHOG'HYLFH

The scanner can also accept programming via its auxiliary port using a
handheld scanning device. Eligible handheld devices must have the ability
to transmit Code 128 function codes such as the programming bar codes
presented in this manual. PSC models QuickScan® 1000 and Quick-
Scan® 6000 support this functionality. Handheld data format require-
ments (baud rate, parity, etc.) are presented in Appendix F of this manual.
Additionally the programmable feature, Aux Port Mode, must be s et to
“External Handheld Input” to allow operation.
NOTE
When you program the scanner using any of the methods above, the scan-
ner will store the changes until reprogrammed or returned to factory
defaults.