2-26 0DJHOODQ 6FDQQHU
Figure 2-13. Physical Measurements: Remote Display
5. Cut the stalk to fit your installation (if required).
6. Route the cable through the base/stalk so that you can plug the
connector into the display head.
7. Remove the rubber band from the connector and attach the con-
nector to the display head.
8. Slip the display head onto the stalk/base.
9. Feed the entire remaining length of the Remote Scale Display
interface cable through the cable routing hole so that the assem-
bled Remote Scale Display can be positioned over the mounting
screw holes.
10. Install mounting screws or bolts to complete th e installation of
the Remote Scale Display. Take care not to pinch or pierce the
interface cable while securing the Remote Scale Display to the
checkstand.
CAPACITY / CAPACITE - 30 X .01 lb / 15 x .005 kg
0.00 lb
5.6"
14.2 cm
Minimum
5.3"
(13.5 cm)
Maximum
11.5"
(29.2 cm)
2.75"
7.0 cm
1.5"
3.8 cm
4.5"
31.6 cm
3.375"
0.953 cm
1.0"
2.5 cm