3URGXFW5HIHUHQFH*XLGH 6-67

,%086%,QWHUIDFH2SWLRQV
The IBM-USB interface offers specific control over interaction with cer-
tain devices. Options for this feature are as follows:
• FULL host interface support — Accepts scanner and scale config-
uration host commands.
• Compatible with Magellan SL host interface support — Uses
Magellan SL host interface support.
• Ignore host interface configuration of scanner and scale ²
Ignores all scanner and scale configuration host commands.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
IBM USB INTERFACE OPTION = FULL HOST INTERFACE SUPPORT
NOTE
This feature applies only to the IBM USB interface. For other IBM interfaces,
refer to the feature, IBM Interface Options, earlier in this chapter.