Q-Logic 59229-05 A, 9100 manual Removing the CPU0 Blade

Models: 59229-05 A 9100

1 168
Download 168 pages 11.42 Kb
Page 119
Image 119

5–Customer Replaceable Units Replacing CPU Blades

Figure 5-2 Removing the CPU0 Blade

8.Install the new CPU blade. Remove protective coverings from the backplane connectors. Open the CPU blade latch and slide the blade into the chassis until it makes contact with the midplane connector. Rotate the latch to lock the CPU blade in place. When the CPU blade is properly installed, the Hotswap LED will be extinguished.

9.Reconnect cables to the Ethernet and serial ports. The IP address of a factory CPU blade replacement is 10.0.0.1.

10.Observe the CPU blade Heartbeat LED. It should blink once per second. If the Heartbeat LED is showing a different blink pattern, contact your authorized maintenance provider.

11.Verify the POST results. Open a Telnet session with the default IP address (10.0.0.1), and enter the Show Blade CPU command to display the diagnostic status for the CPU blade.

12.Compare firmware versions. Open a Telnet session and enter the Show Version command to determine the firmware version.

If the firmware versions are different, proceed to Step 13 to restore the switch configuration.

If the firmware versions on the old and new CPU blades are the same, proceed to Step 16 to restore the switch configuration.

13.Install firmware. Acquire the firmware image file from your own storage or you can download firmware from the QLogic web site.

59229-05 A

5-7

Page 119
Image 119
Q-Logic 59229-05 A, 9100 manual Removing the CPU0 Blade

59229-05 A, 9100 specifications

The Q-Logic 9100,59229-05 A is a high-performance networking solution designed to empower data centers and enterprise environments with optimal connectivity and exceptional throughput. As an essential component in modern IT infrastructures, this product stands out due to its advanced feature set and robust technology.

One of the main features of the Q-Logic 9100,59229-05 A is its support for Fibre Channel technology, which is widely recognized for its reliability and speed in storage area networks (SANs). This networking solution facilitates seamless data transfer at high rates, significantly enhancing the performance of storage systems.

Another notable characteristic of the Q-Logic 9100,59229-05 A is its compatibility with various operating systems and virtualization platforms. This versatility allows organizations to integrate it easily into their existing infrastructure, ensuring a smooth transition and minimal downtime. The product also supports multiple protocols, enhancing its utility in diverse environments.

The Q-Logic 9100,59229-05 A employs cutting-edge technologies such as offload capabilities, which reduce CPU overhead, allowing servers to focus on critical applications. By offloading certain tasks from the server's main processor, this solution improves overall system performance and efficiency, aiding in quicker data processing and reduced latency.

Additionally, security features embedded within the Q-Logic 9100,59229-05 A help safeguard sensitive information as it traverses networks. It supports encryption and secure data transportation protocols, ensuring that corporate data remains protected against unauthorized access and breaches.

The adaptability of the Q-Logic 9100,59229-05 A is further exhibited through its support for multiple speeds, allowing organizations to choose the bandwidth that best fits their current needs while maintaining the potential for future upgrades as demands grow.

In conclusion, the Q-Logic 9100,59229-05 A not only excels in speed and performance but also offers a versatile and secure solution suitable for a wide range of data center applications. Its blend of advanced features, robust technology, and adaptability positions it as a valuable asset for organizations looking to enhance their network connectivity and storage capabilities in an increasingly data-driven world.