11
3. Create the iSCSI initiator list in iSR6200 using one of the following methods:
❑Method 1: Enter the iSCSI initiator name using the SANsurfer Router Manager’s Add Initiator
Wizard. The system prompts you to enter the iSCSI name of an initiator.
❑Method 2: From the server with iSCSI initiators, run a discovery session for the iSCSI port
IP address of the iSR6200. This automatically registers the iSCSI initiator names with the
iSR6200. Running the iSCSI discovery session on different OS environments may vary. The
following example illustrates how to run an iSCSI discovery session on a Windows Server.
To run a discovery session on Windows Server:
a. Install an iSCSI initiator on your server. This can be either a dedicated iSCSI adapter or
an iSCSI software initiator for Windows like the one available from www.microsoft.com.
b. Invoke the software initiator, and then specify the IP address of the iSCSI port on your
iSR6200. For example, on the Microsoft iSCSI Initiator Properties dialog box, follow these
steps (see Figure8):
(1) Click the Discovery tab.
(2) On the Discovery page under Target portals, click Add Portal.
(3) On the Add Target Portal dialog box, in the IP address or DNS name box, type the IP
address of the portal you want to add, leave the Port number set to the default, and
then click OK.
Figure 8. Adding the iSCSI Initiator Target Portal
4. Present LUNs to the iSCSI initiator as follows:
a. To update the SANsurfer Router Manager display, click Refresh.