5
Step 2. Complete the Pre-Installation Checklist
During the initial configuration process, the system prompts you to enter information for each blade contained in the
iSR6200. Use the spaces provided in Table 1 and Ta ble 2 to record the IP addresses for each blade.
Table 1. Worksheet for Router Blade 1 (left) Parameters
Symbolic name of the iSR6200 Blade 1
Management port IP address, subnet
mask, and gateway (if not using DHCP)
iSCSI port 1 IP address, subnet mask,
and gateway (GE-1)
IP address of the Internet simple name
service (iSNS) server for iSCSI port 1 (if
iSNS will be enabled)
iSCSI port 2 IP address, subnet mask,
and gateway (GE-2)
IP address of the iSNS server for iSCSI
port 2 (if iSNS will be enabled)
iSCSI port 3 IP address, subnet mask,
and gateway for the optional (FC3, GE-3,
or 10GE-3) port
IP address of the iSNS server for iSCSI
port 3 (if iSNS will be enabled)
iSCSI port 4 IP address, subnet mask,
and gateway for the optional (FC4, GE-4,
or 10GE-4) port
IP address of the iSNS server for iSCSI
port 4 (if iSNS will be enabled)
Table 2. Worksheet for Router Blade 2 (right) Parameters
Symbolic name of the iSR6200 Blade 2
Management port IP address, subnet
mask, and gateway (if not using DHCP)
iSCSI port 1 IP address, subnet mask,
and gateway (GE-1)
IP address of the iSNS server for iSCSI
port 1 (if iSNS will be enabled)
iSCSI port 2 IP address, subnet mask,
and gateway (GE-2)
IP address of the iSNS server for iSCSI
port 2 (if iSNS will be enabled)