Q-Logic I S R 6 2 0 0 - page 14

14
h. On the LUN Masking Configuration Status window (Figure11), review the results of the target
ports presented for the selected initiators, and then click Finish.
Figure 11. Target Presentation/LUN Mapping Wizard: Viewing Status
5. Log into the iSCSI initiator. For example, if you are using the Microsoft iSCSI initiator, follow these
steps:
a. On the iSCSI Initiator Properties dialog box, click the Targets tab.
b. On the Targets page, select the target (the status is Inactive), and then click Log On.
c. On the Log On To Target dialog box, click OK.