8
The iSR6240 router blade (see Figure5) adds two iSCSI Ethernet ports to the blade configuration.
Each port has the following capacity:
❑Auto negotiating transmission rates of 100 and 1000Mbps
❑Full duplex transmission mode
❑Support for jumbo frames (at 1000Mbps only)
❑RJ45 copper Ethernet connector type
❑iSCSI header and data digest in the hardware
❑IPv4 and IPv6 protocol support
❑iSCSI offload
Figure 5. iSCSI (GE) Ports on the iSR6240 Router Blade
The iSR6250 router blade (see Figure6) adds two 10Gb Ethernet ports to the blade configuration.
Each port has the following capacity:
❑ 10GbE iSCSI ports that run in full duplex mode
❑ Support for jumbo frames
❑ IPv4 and IPv6 protocol support
❑ iSCSI header and data digest in the software
Figure 6. 10Gb Ethernet Ports on the iSR6250 Router Blade
The iSR6260 router blade (see Figure7) adds two more Fibre Channel ports to the blade configura tion.
Each port has the following capacity:
❑Auto-negotiating transmission rates of 2, 4, or 8Gb
❑Hot-pluggable SFP Fibre Channel connector
❑N_Port, NL_Port, or transparent port type
Figure 7. Fibre Channel Ports on the iSR6260 Router Blade
For installation details, diagnostics, and troubleshooting, see the iSR6200 QLogic intelligent Storage Router (iSR)
Installation Guide.
Activity
Link Status
SAN (Green)
LAN (Green)
8Gb (Yellow) 4Gb (Green) 2Gb (Amber)