Q-Logic I S R 6 2 0 0 - page 23

© 2009–2012 QLogic Corporation. QLogic, the QLogic logo, SANsurfer, and SmartWrite are trademarks or registered

trademarks of QLogic Corporation. FICON is a registered trademark of International Business Machines

Corporation.Finisar is a registered trademark of Finisar Corporation. JDSU is a trademark of JDS Uniphase Corporation.

All other brands and product names are trademarks or registered trademarks of their respective owners. Information

supplied by QLogic is believed to be accurate and reliable. QLogic Corporation assumes no responsibility for any errors

in this brochure. QLogic Corporation reserves the right, without notice, to make changes in product design or

specifications.

Contents

Main Purchasers of OEM products should consult with the OEM for support. Quick Start Guide Suggested Configurations Installation Instructions Step 1. Verify the Package Contents Step 2. Complete the Pre-Installation Checklist Step 3. Mount the Router Step 4. Insert Additional Blade into Router (as needed) Step 5. Install the SFP Transceivers Step 6. Apply Power to the Router Page Step 7. Download and Install SANsurfer Router Manager Step 8. Configure the iSR6200 Management Port IP Address Step 9. Present LUNs to iSCSI Initiators Page Page Page Page Step 10. Configure Second Blade (if provided) Step 11. Configure an FCIP Route Step 12. Locate the Blade Serial Number for License Key Activation Serial Number Formats Using the CLI to Locate the Serial Number Using the GUI to Locate the Serial Number